Brand: Transrotor
TRANSROTOR TRA 9
AED 23,925 – AED 30,885Price range: AED 23,925 through AED 30,885
The 9 inch TRA9 arm tube is made of two different aluminum alloys, slid into each other, stiff and resonance-free. The aluminium alloy counterweight has interchangeable brass weights (depending on cartridge weight). VTA adjustment is done using two screw-in adjustment screws to lift the tone arm in parallel. Magnetically adjustable via a fine thread, center adjustment 1.8 g (gram) (red line) for anti skate. Inner wires are pure silver cable (4x Seven Stream van den Hul), oxygen free insulation outside and inside with silicone tubing, protected and damped, connections with silver solder, system connection cable plugs silver-plated. Connection cable are pure silver cable (same material as inner cable), oxygen-free insulation wit RCA or XLR connectors.
Description
After 50 years of designing and building world class turntables, Jochen and Dirk Räke, who has steered the fate of Transrotor for the past twelve years, made the decision to design and build their own Transrotor tonearm. With the immense practical experience, knowledge of turntables, setup and access to the most modern production method the team set out to design the new tonearm. Besides having to meet the tight specification, the tonearm must offer ease of use and simple adjustment. After 2 years of development and testing, the TRA 9 is introduced.
Specifications
Technical data
Effective length: 232.8 mm (approx. 9 inches)
Tone arm distance: spindle to tone arm pivot point 215 mm
Overhang: 17,8 mm
Offset: 23.66 degrees
Zero point inside: 66 mm
Zero point outside: 121 mm
Effective mass: 18 grams (mid heavy, fitting to almost all cartridges)
Connection cable: length approx. 130 cm
Cable material: Pure silver (van den Hul)
Connection plug: RCA or XLR special high conductive coated (WBT) **Please choose when ordering**.
The tone arm is compatible with all 9-inch SME bases manufactured by Transrotor with an extra
Adaptor.
You May Also Like
Brand: Displine
AED 243



Categories: Accessories, All Products
DSP-99-USB-2
AED 243
Flush Mount USB Charger 5V 2.4A for all tablets or wall mounts with USB-A power cable
Brand: Displine
AED 539
Categories: Accessories, All Products
DSP-99-SB
AED 539
Color, Structure and Alcantara samples
Displine finish sample box
A complete range of our powder-coated and anodized finishes
Both finishes: smooth and ribbed
All available color options for our Alcantara® panels
Brand: Displine
AED 225

Categories: Accessories, All Products
DSP-99-RU2
AED 225
Rotation unit for our tablet wall mounts
Compatible with
– Companion Wall 2.0
– Dame Wall 2.0
Brand: Displine
AED 225

Categories: Accessories, All Products
DSP-99-RU
AED 225
Rotation unit for our tablet wall mounts
Compatible with
– Companion Wall für iPad 10.2″ / 10.5″
– Companion Wall für Samsung A8 10.5″
– Dame Wall für iPad 10.2″ / 10.5″
– Dame Wall für iPad 10.9″ / 11″
Brand: Displine
AED 449





Categories: Accessories, All Products
DSP-95-POE2
AED 449
Displine PoE Converter 10W
Power over Ethernet adapter with network connection
Fast internet connection without WiFi plus power supply with the PoE adapter
Requires PoE or IEEE 802.3af power supply
Compatible with 60mm deep flush-mounted boxes and all Displine wall mounts
Brand: Displine
AED 90
Categories: Accessories, All Products
DSP-91-LA
AED 90
This Lightning to USB-A cable is perfect in combination with the 12W 2.4A flush mount power adapter with USB-A from 2USB, if an iPad with Lightning connector is used. recommended for tablets with Lightning connector
Compatible with all Lightning-enabled iPads.









